Using a hammer drill could be exhausting. In fact, the insertion of bits into a hammer drill could be hectic and sensational at the same time, which is correct. Yea, that’s true; even an experienced folk will concur.
And that’s because hammer drill bits have their diameters range between 0.8 and 10 millimeters, and some models have their length be between 1.5-13 millimeters.
Despite their variance in shapes and designs, some products have a specific size they can accommodate. Operators don’t have the time in the whole world to take measurements most time, so they just insert the bits and start the job. Meanwhile, this act isn’t ideal. It could lead to breakages and jamming of the bits.
How to Put a Bit in a Hammer Drill? 14 Easy Steps
- There are different types of hammer drill bits. There are breaker bits, chisel bits, and others. So, know what you want first.
- Hammer drills could be seen in two significant designs – quick-release and key-lock.
- The quick-release allows operators to fix the drill with bare hands, while the other requires a screwdriver to lock in the bolt that joins the drill bits to the hammer drill.
- Reading the manual before you proceed will do you a lot of favor as you go through this. The manual will enable you to have more understanding of the design of the hammer drill you’ve bought.
- Hammer drill uses a standard bits and specialized bits. Find out the type and size that would suit your need concerning the task you’ve got at hand.
- Make sure you clean the bit. Use a dry clean cloth to remove dirt from the bits, including those hiding in the crevices.
- Grab the handle of the hammer drill and identify the structure. Check the 3-jawed chuck especially.
- Relax the chuck by turning it clockwise to make the fixation of the hammer drill bits easy.
- Differentiate between the head and the tail of the bit. The head is the essential part of the bit with relevant design and shape, which a workman needs to tackle the task.
- Insert the tail through the opened chuck and ensure that the bit hangs snugly to the end of the hammer drill. Tighten the chuck to make the bit firm onto the unit. Invert the position of the hammer drill by turning it upside down to see if the bit will escape out of the chuck.
- If peradventure the bit is wobbling and virtually not sitting right in the hook at the end of the chucks, then remove the bit altogether and apply grease from the stem to the root of the bit before fitting it back snugly into the chuck.
- Check again to see if the bit is sitting snugly inside the chuck. Use your hand to check its firmness.
- Plug the power cord into an outlet that delivers the same level of required voltage. Do this and switch on the power of the hammer drill after that.
- Locate the mode setting toggle and place it on the drilling mode. Use the hammer drill by pressing it against the workpiece to ascertain its performance.
What is a Hammer Drill Bit?
Hammer drill bits are tools the power unit uses to drill, carve, and perfect shapes and depths on masonry projects. On the other hand, hammer drill bits could be defined as handy fixable tools that serve as accessories to a mason in using the power tool for executing masonry projects.
Hammer drills can work on concretes, woods, plastic, and metals. Hammer drill bits have a diamond on their tips, making them capable of piercing through hard surfaces perfectly.
What Type of Drill Bits are Used with a Hammer Drill?
The type of drill bits you can use for hammer drills are auger bits, rivet bits, chisel bits, glass bits, Forstner bits, hole saw, installer bits, step bits, Spirec drill, masonry bits, counter-boring drill, counter-sinking drill, and many more. All these can be used on hammer drills effectively.
Can You Use a Drill Bit in a Hammer Drill?
Yea, you can. However, this is after you’ve inserted the hammer drill bit into the unit. If it’s snug inside the unit and you’ve chosen the mode, push the hammer drill against the workpiece while the bit revs at a high rate. Notwithstanding, hammer drill uses masonry bits and regular bits. You can check out the drill bit hammer drills used often in the upper segment.
How Do You Change the Drill Bit on a Hammer Drill?
- Turn off the hammer drill and remove the power cord from a power outlet.
- Turn the chuck anticlockwise to release the bit from the jaws quickly. You might want to pull through the sleeves of the bit by shaking the hammer drill forth and back while you draw.
- If the drill bit is jammed, you might want to clamp it first with a vice or a micro hook while you lightly hammer it and give it some strokes/pulls.
- Using an electric drill? If yes, you can use two gas wrenches to pull it out. Remember that pulling it out after clamping the sleeves turns the chuck anticlockwise.
- Do this and fix another bit into your hammer drill.
What is the Difference Between a Hammer Drill and a Regular Drill?
A regular drill only digs a hole, but a hammer drill drills a hole with percussion. It could work at a high pulsating degree to break hard surfaces, such as rocks and concretes. While a regular drill can rev a few thousand per minute, a hammer drill could rev tens of thousands per minute. Unlike regular drills, hammer drills have modes, making them usable as a standard drill.
Final Words
This is how to insert bits into hammer drills and get the best result. This works for all models, and you’d have the best user experience at the end of the day. Check the ideas we’ve stated here to ensure you do them correctly.
